BEO.ZONE

BeoGram 4500

BeoGram Record Decks

Production: 1988 - 05/1991

Designer: Jacob Jensen

Documents: Service Manual, Schematic, Owners Manual

In comparing this record deck with the Beogram 9500, the only difference - as the overall exterior finish of the two machines were identical - was that Beogram 4500 had an RIAA pre-amplifier built in, whereas the Beogram 9500 did not.

The Beosystem 4500 (of which Beogram is a part) has always looked a beautiful system, especially as the components could be hung on the wall and displayed next to each other. For obvious reasons, Beogram 4500 could not be attached in precisely this same fashion although a special metal shelf could be bought to use the turntable within the group.

BeoGram 4500 technical specifications

Types: 
5951 (1988 - May 1991) 
AUS 5955 (1988 - May 1991) 
J 5954 (1988 - May 1991) 
USA 5953 (1988 - May 1991) 
Wow and flutter, DIN < +/- 0.06 % 
Rumble DIN weighted > 80 dB 
Rumble DIN unweighted > 55 dB 

Speeds: 33 - 45 rpm 
Speed deviation: < +/- 0.2 % 
Power supply: 
5951: 220V 
5953: 120V 
5954: 100V 
5955: 240V 
Power consumption: < 10 W 
Dimensions W x H x D: 42 x 7.5 x 32.5 cm 
Weight 5.3 kg 

Link compatibility: Data Link 

Most recent S/W 1.2