Being sold primarily in North America Beosystem AV7000 produced Dolby Pro-Logic Surround Sound and comprised:
Beosystem 7000, a Beovision MX6000 television and four active speakers, it was phased out upon the introduction of Beosystem AV9000.
The remote control recommended for Beosystem AV 7000 was Beolink 1000 although both the Beolink 5000or the Beolink 7000 terminals could be utilized but with certain variations and restrictions in the button commands.
Operation Beolink 1000
Sound modes: mono (1 loudspeaker), Stereo (2 loudspeaker), Stereo +Centre (3 loudspeaker), Stereo -4 (4 loudspeaker), Dolby Surround (5 loudspeakers)
Volume range: 80 dB
Treble: +/- 8 dB, 10 kHz
Bass: +/- 8 dB, 870 Hz
Centre speaker:
Output power: IHF A202 45 W / 8 ohms
Frequency response: 100 - 20000 Hz
Distortion: <0.2 %
Stereo mode:
Signal-to-noise ratio: A weighted > 86 dB (Ref.: V in = V out = 1 V
Distortion Typ: 0.1 % (1 kHz/V in = V out = 1 V
Dolby Surround Sound mode:
Left/right balance control: +/- 6 dB*
Front/Rear balance control: +/- 6 dB*
Centre level control: +/- 6 dB*
* Total range i limited to 25 dB, which can cause limitations in centre level and balance controls
Signal-to-noise ratio Left, Right, Rear: >55 dB (Ref.: V in = 300 mV, V out = 100 mV
Signal-to-noise ratio Centre: >55 dB (Ref.: V in = V out = 300 mV / 8 ohm
Channel separation: Typ. 25 dB
Time delay Surround Sound channel: 20.4 mSec
Power supply: max 71 W
Power consumption: 3 W
Dimensions W x H x D: 42 x 7.5 x 32.5cm
Weight: 8.1kg
Connections: Aux Audio, Power Link AUDIO, Aux Video, Active speakers, Centre speaker: Push terminals, Subwoofer Phono, Other TV / VCR / CDV Phono, IR transmitter 4 sockets, mini-jack
Extern IR receiver Mini-jack
Link compatibility: Datalink
The brand names Bang & Olufsen, B&O, trade mark and many of the product names and details together with on-site photographs are the property and copyright of Bang & Olufsen. The information on this website is provided only as a guide to Bang & Olufsen collectors and enthusiasts of the marque.