BEO.ZONE

BeoMaster 2200

BeoMaster Tuner/Amplifier

Production: 1977 - 12/1980

Designer: Jacob Jensen

Documents: Schematic, Schematic, Service Manual

Replacing Beomaster 2000, the Beomaster 2200 receiver was another high-quality product delivering 2 x 40W of undistorted sound. Solidly built, Beomaster 2200’s controls were sub-divided into three groups: on/off and volume, its primary controls, were above deck with the presetting of the five FM radio programmes, AFC and bass/treble controls hidden discretely under an aluminum lid.  Further, connections for record deck, cassette recorder, headphones and two pairs of stereo speakers were positioned at the rear of the unit.

Volume was by way of a slider control positioned at the top of Beomaster 2200 with other controls - designed as discrete push-buttons - blending in perfectly allowing for a smooth, easy to dust, finish.

Beomaster 2200 formed the foundation for a range of other Bang & Olufsen products, notably the music centers. Beocenter 3300 - with its in-built record deck - is based upon the Beomaster 2200 and so is Beocenter 4000 (1978 model) which came with its cassette deck.

When connected to other compatible B&O products, Beomaster 2200 could be made up as part of the Beosystem 2200.

BeoMaster 2200 technical specifications

ype: 1601 (1977 - Dec 1980) 
Power output: 2 x 40 W / 4 ohms 
2 x 30 W / 8 ohms 
Music power: 2 x 75 W / 4 ohms 
2 x 40 W / 8 ohms 
Speaker impedance: 4 ohms 
Harmonic distortion: < 0.05 % 
Intermodulation: < 0.1 % 
Frequency range: 20 - 30000 Hz 
Signal-to-noise ratio pickup low impedance: > 60 dB 

Bass control at 40 Hz:: +/- 12 dB 
Treble control at 12500 Hz: +/- 12 dB 

FM tuner range: 87.5 - 108 MHz 
AM tuner: 
LW 147 - 350 kHz 
MW 520 - 1610 kHz 

Power supply: 110 - 130 - 220 - 240 V 
Power consumption: 15 - 175 W 
RIAA amplifier: built-in 
Dimensions W x H x D: 54 x 7.5 x 30.5 cm 
Weight: 8.7 kg 

Connections: Speakers 2 sets 
Headphones: max. 13 V / 200 ohms 
Tape: DIN 
Phono: DIN