BEO.ZONE

BeoMaster 3000 (1985)

BeoMaster Tuner/Amplifier

Production: 1985 - 05/1987

Designer: Jacob Jensen

Documents: Owners Manual, Service Manual

Beomaster 3000 was the heart of the Beosystem 3000. Equipped with an FM and AM receiver with four preset FM stations it had an adequate amplifier delivering 30W per channel of undistorted stereo sound. An FM tuner was fitted which was also able to receive both LW and MW broadcasts. The receiver replaced Beomaster 2400and was similarly specified to that of the Beomaster 2000 but equipped with its infra-red remote control which could control essential functions of the unit itself as well as a connected Beogram 3000 and Beocord 2000, two recommended products (as there never was a compatible Beocord 3000).

Superficial changes were made between the two receivers; the main difference technically was that the Master Control Link 30 multi-room system was integrated within the electronics of the Beomaster 3000 so that around the house music could be heard, in a similar fashion to that of Beosystem 5000 and Beocenter 7000.

Beogram CDX compact disc player could also be connected to the receiver although could not be controlled by remote control.

BeoMaster 3000 (1985) technical specifications

Types: 
GB 2932 (1985 - Jan 1987) 
EUR 2931 (1985 - March 1987) 
AM/FM 2937 (1985 - Jan 1987) 
AUS 2935 (1985 - Oct 1986) 
US 2933 (1985 - Jan 1987) 
D 2939 (1985 - Jan 1987) 
Power output RMS DIN/IEC: 2 x 30 W / 8 ohms 
Harmonic distortion DIN/IEC: < 0.08 % 
Power output 20 - 20,000 Hz IHF: 2 x 25 W / 8 ohms 
Total harmonic distortion IHF: 1.6 dB / 8 ohms 
Intermodulation IHF: < 0.1 % 
Response frequency 20 - 20,000: Hz +/- 1.5 dB 

FM range: 87.5 - 108 MHz 
AM tuner: 
LW range 2932 - 2935 - 2937: 150 - 350 kHz 
MW range 2932 - 2935 - 2937: 520 - 1610 kHz 
Power supply: 
2932 - 2935: 240 V 
2939: 220 V 
2931 - 2939: 220 V 
2933: 120 V 
Power consumption:: 20 - 170 W 
Dimensions: W x H x D: 62 x 7 x 25cm 
Weight: 7 kg 

RIAA amplifier: built-in 

Connections: Phono DIN 
Tape 1: DIN 
Tape 2: Phono plugs 
Speakers: 2 sets 
Headphones: max 12 V / 220 ohms