BEO.ZONE

BeoSystem AV7000

BeoSystem AV

Production: 1993 - 2000

Designer: Jacob Jensen

Being sold primarily in North America Beosystem AV7000 produced Dolby Pro-Logic Surround Sound and comprised:

Beosystem 7000, a Beovision MX6000 television and four active speakers, it was phased out upon the introduction of Beosystem AV9000.

The remote control recommended for Beosystem AV 7000 was Beolink 1000 although both the Beolink 5000or the Beolink 7000 terminals could be utilized but with certain variations and restrictions in the button commands.

BeoSystem AV7000 technical specifications

Operation Beolink 1000 
Sound modes: mono (1 loudspeaker), Stereo (2 loudspeaker), Stereo +Centre (3 loudspeaker), Stereo -4 (4 loudspeaker), Dolby Surround (5 loudspeakers) 
Volume range: 80 dB 
Treble: +/- 8 dB, 10 kHz 
Bass: +/- 8 dB, 870 Hz 
Centre speaker: 
Output power: IHF A202 45 W / 8 ohms 
Frequency response: 100 - 20000 Hz 
Distortion: <0.2 % 
Stereo mode: 
Signal-to-noise ratio: A weighted > 86 dB (Ref.: V in = V out = 1 V 
Distortion Typ: 0.1 % (1 kHz/V in = V out = 1 V 
Dolby Surround Sound mode: 
Left/right balance control: +/- 6 dB* 
Front/Rear balance control: +/- 6 dB* 
Centre level control: +/- 6 dB* 
* Total range i limited to 25 dB, which can cause limitations in centre level and balance controls 

Signal-to-noise ratio Left, Right, Rear: >55 dB (Ref.: V in = 300 mV, V out = 100 mV 
Signal-to-noise ratio Centre: >55 dB (Ref.: V in = V out = 300 mV / 8 ohm 
Channel separation: Typ. 25 dB 
Time delay Surround Sound channel: 20.4 mSec 

Power supply: max 71 W 
Power consumption: 3 W 
Dimensions W x H x D: 42 x 7.5 x 32.5cm 
Weight: 8.1kg 

Connections: Aux Audio, Power Link AUDIO, Aux Video, Active speakers, Centre speaker: Push terminals, Subwoofer Phono, Other TV / VCR / CDV Phono, IR transmitter 4 sockets, mini-jack 
Extern IR receiver Mini-jack 

Link compatibility: Datalink