BeoMaster Tuner/Amplifier
Production: 1986 - 03/1990
Documents: Owners Manual, Schematic
Following on from the Beomaster 5000, this updated receiver - Beomaster 5500 - looked very similar on the outside. On the inside few changes had been made; the most significant update had been made to the way that the remote control functioned. Now based upon Beolink codes (previously every system had its own remote control ‘codes’ whereby only that one product could be controlled) the move was one based upon product integration and standardization. So, the Beolink which you bought with your Beosystem 5500 could also be used on other newer products within the B&O range, and even today, after more than twenty years’ service this is still the case.
Whereas the Beomaster 5000 could be opened up from the front to control a certain number of its features, this was not the case with Beomaster 5500 when the whole of the fascia remained rigid. A small headphone socket was placed on the front of the receiver, and along with a few other re-design features, that was all that was carried out on this product renewal.
Powered by its own 55 Watt amplifier, the receiver could provide source details illuminated on the new Beolab Penta loudspeakers which had just been released with Beosystem 5500. In this way, one could see the source being played on the front of the column speaker’s front cabinet.
Beomaster 5500 was replaced by the similar-looking Beomaster 6500.
Types:
2331 (1986 - March 1990)
AUS 2335 (1986 - Aug 1989)
GB 2332 (1986 - March 1990)
J 2334 (1986 - Oct 1989)
US 2333 (1986 - Dec 1989)
Long-term max. output power IEC 2 z 110 / 8 ohms
Power output 20 - 20,000 Hz IHF 2 x 50 W / 8 ohms
Total harmonic distortion IHF < 0.09 % / 8 ohms 20 - 20,000 Hz
Intermodulation IHF < 0.1 %
Signal-to-noise ratio:
TAPE A-weighted: >78 d
PHONO A-weighted: >80 dB
Channel separation: 10000 Hz 60 dB
FM range 87.5 - 108 MHz
LW range 150 - 350 kHz
MW range 520 - 1610 kHz
Power supply:
2331: 220 V
2332/2335: 240 V
2334: 100 V
Power consumption. max 225 W
Dimensions W x H x D: 42 x 7.5 x 32.5cm
Weight: 8.5 kg
RIAA amplifier: built-in
Connections: Beocord Tape 1 7 pole DIN, Datalink
Beocord Tape 2 7 pole DIN, Datalink
Beogram CD 7 pole DIN, Datalink
Beogram LP 7 pole DIN, Datalink
Beovox/BeoLab 4 pole DIN
Beovision 7 pole DIN, Datalink
Link room: Speaker set Master Control Link
Line IN/OUT Phono plugs
Extra speakers Phono plugs
Link compatibility: Master Control Link
The brand names Bang & Olufsen, B&O, trade mark and many of the product names and details together with on-site photographs are the property and copyright of Bang & Olufsen. The information on this website is provided only as a guide to Bang & Olufsen collectors and enthusiasts of the marque.