Production: 1989 - 05/1991
The Beolab 200 was a power amplifier delivering 150 watts of mono sound and was made specially to both power and to sit beneath a Beovox Penta loudspeaker. It gave music a tremendous lift by the power which it could deliver. Normally, Beovox Penta speakers - as passive loudspeakers - were driven by a separate amplifier, but with either Beolab 150 or Beolab 200 the user had the possibility of powering the speakers individually.
Each of these components were ‘penta’ shaped in that they had five sides. The Beolab 200 was positioned at the bottom of the Penta column loudspeaker and turned itself on automatically when it received an incoming signal. It also automatically turned itself off three minutes after receiving its last signal. Inbuilt circuits were included which prevented distortion to the sound and damage to the speakers by softly rounding off signals which were too powerful. Another automatic circuit prevented damage to the drivers due to prolonged overloading.
Both BeoLab 150 and 200 were used as part of the BeoLab Penta active loudspeakers range. Each unit was connected by using a choice of either DIN sockets or two clip-sockets and there was also a Power Link socket for connection to newer Bang & Olufsen components. A line input phono socket was also provided and the whole unit was connected to the mains.
The Beolab 200, like the Beolab 150, was sold in pairs.
|Market||Type||Intro. year||Last sold|
|Power output 20 - 20,000 Hz IHF||1 x 150 W / 8 ohms|
|Power output RMS DIN/IEC||1 x 175 W / 8 ohms|
|Power output music||1 x 225 W / 8 ohms|
|Total harmonic distortion||< 0.015 %|
|Intermodulation distortion IHF||< 0.02 %|
|Wideband damping factor IHF||150|
|Dynamic headroom IHF||> 1.5 dB / 8 ohms|
|SN A-weighted 1 W IHF||> 78 dB|
|S/N A-weighted 150 W||> 100 dB|
|LINE input||80 mV / 1W, 10 V / 150 W, 150 kohms
22 kohms, phono plugs
|Speaker input||800 mV / 1 W, 10 V / 150 W, 15 kohms
DIN 4-pin or spring loaded contacts
|Bass level switch||Linear, +3 dB / 40 Hz, +6 dB / 40 Hz|
|Sensitivity switch||0 dB, -3 dB, -6 dB|
|Power supply||1731 230V
|Power frequency||50 - 60 Hz|
|Dimensions W x H x D||5 x 13 x 25 cm|