Production: 1989 - 02/1994
Documents: Owners Manual
Beocenter 9500 was developed because of better technologies that were around at the time, and as a way of matching better other Bang & Olufsen products. Time never stands still, so they say, and a manufacturer always has to keep abreast of what is happening in the technological world and respond accordingly.
The biggest technological advancement as far as the introduction of Beocenter 9500 was concerned was that of two-way remote control communication. Still fondly remembered nowadays, this system gave visual feedback of sources being played together with volume levels on a suitably equipped two-way remote control terminal. Beolink 5000 or even the sophisticated Beolink 7000 could be used. Active speakers - such as Beolab Penta - could also be used too, although the Beocenter 9500 was still equipped with a suitably powerful amplifier to drive almost any of the passive speakers that were on sale.
Visually, Beocenter 9500 now had a shiny metal set of top covers as opposed to the duller versions on its Beocenter 9000 forerunner.
A visually matching turntable - Beogram 9500 - was available for purchase if you wished to play your stock of LP records. This matched Beocenter 9500 perfectly in looks.
In 1993 Beocenter 9500 was replaced by the cut-down Beocenter 9300, which, although looked exactly the same, had been almost totally redesigned.
Bang & Olufsen with Jacob Jensen were given the 1990 iF Design Award for their design of the Beocenter 9500.
System stand ST9500 was produced especially for accommodating the Beocenter 9500 although was equally at home with any of this particular system’s sister products such as the Beocenter 9000, 8000 and 8500.
EU 2506 (1989 - Feb 1994)
GB 2507 (1989 - Dec 1993)
AUS 2510 (1989 - Dec 1993)
J 2509 (1989 - Dec 1993)
US 2508 (1989 - Dec 1993)
Long-term max. output power: IEC 2 x 80 watts / 8 ohms
Total harmonic distortion IHF: < 0.1 % & 30 watts 20 - 20,000 Hz
Dynamic headroom 1 dB: / 8 ohms
Intermodulation IHF: < 0.1 %
Bass control at 40 Hz: +/- 10 dB
Treble control at 12,500 Hz: +/- 8 dB
Compact cassette C46 - C120
Recording system HX PRO
Tape head Sendust
Wow and flutter DIN < 0.15 %
Frequency range chrome 30 - 18,000 Hz +/- 3 dB
Signal-to-noise ratio CCIR/ARM
Metal Dolby NR B:>64 dB, C: >73 dB
Chrome Dolby NR B:>65 dB, C: >74 dB
Ferro Dolby NR B:>63 dB, C: >72 dB
Power supply: 110 - 130 - 220 - 240 voltage switch
Power consumption Max. 200 W
Dimensions W x H x D 76 x 11 x 34cm
Weight 14 kg
FM range: 76 - 90 MHz (Type 2509, 2513)
87.5 - 108 MHz (Type 2506, 2508, 2510, 2511, 2512, 2514)
LW range 2506, 2511: 150 - 350 kHz
MW range 2506, 2508, 2509, 2510, 2511, 2512, 2513, 2514520 - 610 kHz
Compact disc player:
Frequency range 3 - 20,000 Hz +/- 0.3 dB
Signal-to-noise ratio > 100 dB / 110 dB A-weighted
Dynamic range > 96 dB
Harmonic distortion 0.0025 % at 0 dB
0.0025 % at -20 dB
Channel separation > 101 dB
Converter system 2 x 16 bit, 4 x oversampling
Low pass filter analogue Bessel
Connections: Beocord Tape 1 Built-in
Beocord Tape 2 7-pin DIN, Datalink
Beogram CD Built-in
Beogram LP 7-pin DIN, Datalink
BeoLab 2 x Power Link
Beovox 4-pin DIN
Beovision 7-pin DIN, Datalink
Link compatibility: Master Control Link
Most recent S/W 1.5
The brand names Bang & Olufsen, B&O, trade mark and many of the product names and details together with on-site photographs are the property and copyright of Bang & Olufsen. The information on this website is provided only as a guide to Bang & Olufsen collectors and enthusiasts of the marque.